Termo 75 DA

The TERMO 75 DA system is intended for making windows, balcony doors (opening inside) and fixed walls. It is a profile system with an interrupted thermal bridge and a wooden cladding on the inside of the opening. The basic installation depth of the frame is 76.5 mm. Interruption of the thermal bridge is achieved with polyamide strips of 26 and 34 mm. In order to further improve the thermal characteristics of the profile, profiled XPS rods (extruded polystyrene - ʎ = 0.035 W / m2K) are installed in the profile chambers. Sealing was performed with EPDM seals. Possible types of window opening: hinged, hinged, hinged-hinged. The system is compatible with facade systems. The hardware is systemic from the manufacturer ROTO.

Windows made of a combination of wood and aluminum combine the best characteristics of both materials. The Termo 75 DA system has high stability and can withstand high loads. The basis of this window is aluminum, and wood with its warmth gives the interior a special note. Wood is a window mask that can be replaced after a certain time with other types and colors of wood because it is fastened with PVC buttons. The aluminum / wood combination has found great application in modern architecture. A large selection of types and colors of wood that can be used in the manufacture give modern buildings an attractive appearance.

Technical characteristics of the system:

  • frame depth: 76.5 mm
  • wing depth: 97.5 mm
  • filling depth: up to 44 mm
  • polyamide strips: 26 and 34 mm
  • wing weight: 130 kg
  • air permeability: EN 12207 (class 4)
  • watertightness: EN 12208 (class 9A)
  • wind resistance: EN 12210 (class C5 / B5)
  • noise protection: EN ISO 7171 (Rw = 35,39,41,42 dB)
  • burglary resistance: EN 1627 (RC2)
  • calculation of Uw coefficient: DIN EN ISO 100772 (,01.0 Wm² / K)
  • base material: EN AW6060
  • interior lining material: wood
  • polyamide tape material: PA66 GF25
  • sealing material: EPDM
  • surface treatment: DIN 17611
  • quality control: DIN EN ISO 9001


Alagici bb, 71260 Kresevo

Bosnia and Herzegovina


+387 (0) 30 800 062

+387 (0) 63 369 055




Cookie policy

Privacy Policy

Terms of use

ALKUS d.o.o. - 2021 all rights reserved Design and development logo